Recensioni Electrix Warp Factory ( 7/10) - 0 recensioni

In tutto il mondo, 7 dei nostri utenti hanno votato questo prodotto : 7/10

Elenco dei membri seguiti da 2

LInguaggio	Membro	Caratteristiche1	Facilità d'uso2	Qualità del Suono3	Opzioni Generali4
	drbob1
	moosers

• 1↑. Quali sono gli effetti, o tipi di effetti disponibili? Che tecnologia viene utilizzata? (analogica, digitale, valvolare...) Può essere editato? attraverso un programma di utility Mac/PC? Che tipo di connessioni sono disponibili? (Audio/MIDI) E' raccabile?
• 2↑. Il suono o l'editing degli effetti è semmplice? Il manuale è abastanza chiaro e dettagliato?... La configurazione / setup generale è semplice?
• 3↑. Con quali strumenti li usi? Quali sono i tuoi preferiti, quali quelli che odi? Il suono dei tuoi strumenti e del tuo microfono è fedelmente riprodotto? Il preamplificqtore è trasparente o modifica il suono?
• 4↑. Cosa ti piace di più e cosa di meno di questa? Hai provato molti altri modelli prima di trovare questo? Qual è la tua opinione sul rapporto qualità/prezzo? Sapendo allora ciò che sai adesso rifaresti la stessa scelta?... Precisione e qualità del suono?

• 09/04/12

  REcensione di drbob1 ( traduzione ) migliora questa traduzione "Cool hardware vocoder"

  See the translation of this user review with Google translate

  Caratteristiche

  This is an unusual hardware vocoder. It does simple vocoding fairly well, probably digitally because there is a noticeable delay before the onset of the envelope opening. But it has a lot of other tricks up its sleeve. First off, you can tune the formants either high or low, adjust the Q and the number of sampling bands from the front panel. This gives straight forward vocoding.
  
  
  
  Next, you can tune the center frequency of the vocoder from two octaves below to two above the notes you're playing. This is combined with some distortion with low frequencies for a fairly aggressive effect. Tuning it higher does a kind of chipmunk, girlie man thing, pretty cool and probably even more useful if you're using something other than voice as a formant generator.
  
  
  
  It's stereo in/out and there's no word in the manual about mixing, not sure if it's truly two channels or not.
  
  
  
  There's a gain knob for the input, and one of Electrix traditional "scroll buttons" to choose inputs from mic to line, to auto, which will choose an input depending on which is active at the time. Could be cool for blending vocals and recorded music.
  
  
  
  There's a blend knob and a kill dry switch (which doesn't actually kill the dry, just drops it down another 12 dB or so). Since I'm using this mostly with guitar/microphone, the idea of blending the clean signal with the vocoded signal isn't as useful, but there's also a bypass footswitch to allow turning it on/off for those epic solos. Also, you can hit a button or a footswitch to "freeze" the formant, allowing a fixed wah kind of effect where the envelop stays open.
  
  
  
  It also has a tuneable synth generator and a noise generator so that you can use them for carrier or blend them with your input signal for more radical synth effects.
  
  
  
  It does have midi connections, which should allow sequencing of all controls, with the possibility of animating and midi syncing them. Pretty straight forward using CC messages.

  Facilità d'uso

  Since it's all knobs, the interface is crystal clear. This is more along the lines of a throwback hardware vocoder, although it is digital. It took me less than 5 minutes to figure out all I needed to know, reading the manual clarified what was happening with a few things (like the kill dry only cutting from 90% to 20% blend, vs the midi ability to set it to 100% or 0%). Very well done.

  Qualità del Suono

  As I mentioned, using guitar as the carrier and voice as the formant generator. It's pretty easy to get a Frampton kind of sound, it's just as easy to take that and run with it into some pretty strange territory, with whistles and quacks and so on. Frequency response is listed at 14kHz (18 bit, 32kHz sampling) so it's going to lose a little bit of air/brilliance but not enough that I can hear it. I don't own any other hardware vocoders, but I'd guess that it's fully as flexible and cool as most of them. And I'm not aware of any digital vocoders with this level of control from the front panel. And with the midi control, you can trigger any of the functions from an envelop generator, aftertouch, pitch, note on/off or whatever you can think of.

  Opzioni Generali

  There's a lot of quibbles that it doesn't do traditional vocoding very well, I'd say the few msec lag between beginning to speak and the onset of vocoding is my only problem there. At the original $300+ price they weren't very practical, but for the current $150-200 they're cool and at the $120 I spent, how could I lose! The only other hardware vocoders I've seen have been a LOT more. Highly recommended if you can find one cheap.
  Did you find this review helpful?sìno
• 10/03/10

  REcensione di moosers ( traduzione ) migliora questa traduzione

  See the translation of this user review with Google translate

  Caratteristiche

  The Electrix Warp Factory is a unique vocoder, designed for uses of all types. It has an XLR input in the front, as well as an XLR output in the back in addition to 1/4" connections, RCA, and MIDI connections in the back. It is rack mountable and will take up two spaces in a traditional rack casing.

  Facilità d'uso

  Using the Electrix Warp Factory will certainly take a bit of practice, as this isn't your typical effect. However, after playing with it for a little while I felt that I could get the hang of it pretty well. There is definitely a good amount control over your tone, with control over both the mic preamp gain and for 'warping' your signal. The warp section has parameters for gender, Q (bandwidth), order, pitch, robot punch, effect mix, and a slew of buttons as well including for format freeze. If you are are new to vocoding, I'd definitely suggest having the manual around.

  Qualità del Suono

  Even though I haven't used all that many different hardware vocoders, the Electrix Warp Factory is definitely up there with the best of them that I have used. It offers up a ton of control, and in general the tones sound clear and of course vocoded! You can absolutely make your voice sound like a robot with this box! It is quite powerful, especially because it has so many different parameters to work with. You can actually use it with any instrument, not just a voice, which is cool, but of course the best use with the Electrix Warp Factory will always be with a voice as this is what it is designed for...

  Opzioni Generali

  I don't really know what kind of price the Electrix Warp Factory commands, as I don't own one and have never needed to do the research on it. However, Electrix usually has pretty good prices for their gear while still maintaining a very high quality. The bottom line with the Warp Factory is that if you are looking for a vocoder in a piece of outboard gear, definitely do not decide on one until you check out this one!
  Did you find this review helpful?sìno

Elenco dei membri seguiti da 3

LInguaggio	Membro	Caratteristiche	Facilità d'uso	Qualità del Suono	Opzioni Generali	Google Translation
	dubfx					leggi
	3prod					leggi
	Funkix					leggi

Elenco dei membri seguiti da 2

LInguaggio	Membro	Caratteristiche	Facilità d'uso	Qualità del Suono	Opzioni Generali	Google Translation
	drbob1					leggi
	moosers					leggi